Panasonic TH-49LFV8U Operating Instructions Manual

Also see for TH-49LFV8U: Operating instructions

Contents

Panasonic TH-49LFV8U Operating Instructions Manual Manual pdf 7 page image

Safety PrecautionsWARRNING■ SetupOptional accessory• Installation MountTY-VK49LV2 (for TH-49LFV8)TY-VK55LV1、TY-VK55LV2 (for TH-55LFV8)• Cover-frame KitTY-CF55VW50 (for TH-55LFV8)• Early Warning SoftwareET-SWA100 series *1• Video Wall ManagerTY-VUK10 *2*1: Suffix of the part number may differ depending onthe license type*2: Supports Ver1.7 or laterSmall parts can present choking hazard if accidentallyswallowed. Keep small parts away from young children.Discard unneeded small parts and other objects,including packaging materials and plastic bags/sheets toprevent them from being played with by young children,creating the potential risk of suffocation.Do not place the Display on sloped or unstablesurfaces, and ensure that the Display does not hangover the edge of the base.• The Display may fall off or tip over.Install this unit at a location with minimal vibrationand which can support the weight of the unit.• Dropping or falling of the unit may cause injury ormalfunction.Do not place any objects on top of the Display.• If foreign objects or water get inside the Display, ashort-circuit may occur which could result in fire orelectric shock. If any foreign objects get inside theDisplay, please consult your local Panasonic dealer.Transport only in upright position!• Transporting the unit with its liquid crystal panelfacing upright or downward may cause damage to theinternal circuitry.Ventilation should not be impeded by coveringthe ventilation openings with items such asnewspapers, table cloths and curtains.For sufficient ventilation, see page 7.Caution - For use only with UL Listed Wall MountBracket with minimum weight/load 30.0 (66.1 lbs).When installing the Display vertically;When installing the Display vertically, be sure thatthe Power Indicator comes to the downside. Heat isgenerated and it may cause fire or damage to theDisplay.90Cautions for Wall Installation• The installation should be performed by an installationprofessional. Installing the Display incorrectly maylead to an accident that results in death or seriousinjury.• When installing on a wall, a wall hanging bracket thatconforms to VESA standards must be used.VESA 400 mm × 400 mm• Before installation, be sure to check if the mountinglocation has enough strength to support the weightof the LCD display and the wall hanging bracket foranti drop.• If you terminate the use of the Display on the Wall,ask a professional to remove the Display as soon aspossible.• When mounting the Display on the wall, prevent themounting screws and power cable from contactingmetal objects inside the wall. An electric shock mayoccur if they contact metal objects inside the wall.Do not place the display where it may be affected bysalt or corrosive gas.• Doing so may cause the display to fall due tocorrosion. Also, the unit may malfunction.Do not install the product to a place where theproduct is exposed to direct sunlight.• If the screen is exposed to direct sunlight, the liquidcrystal panel may have adverse effect.■ When using the LCD DisplayThe Display is designed to operate on 110 - 127 or220 - 240 V AC, 50/60 Hz.Do not cover the ventilation holes.• Doing so may cause the Display to overheat, whichcan cause fire or damage to the Display.Do not stick any foreign objects into the Display.• Do not insert any metal or flammable objects into theventilations holes or drop them onto the Display, asdoing so can cause fire or electric shock.5English