Panasonic TH-49LFV8U Operating Instructions Manual

Also see for TH-49LFV8U: Operating instructions

Contents

Panasonic TH-49LFV8U Operating Instructions Manual Manual pdf 12 page image

Remote Control Batteries1. Pull and hold the hook, then open the battery cover.2. Insert batteries - note correct polarity (+ and -).AAA/R03/UM4 type3. Replace the cover.Helpful Hint● For frequent remote control users, replace oldbatteries with Alkaline batteries for longer life.Precaution on battery useIncorrect installation of the batteries can cause batteryleakage and corrosion that will damage the remotecontrol transmitter.Disposal of batteries should be in an environment-friendly manner.Observe the following precaution:1. Batteries shall always be replaced as a pair. Alwaysuse new batteries when replacing the old set.2. Do not combine a used battery with a new one.3. Do not mix battery types (example: “Zinc Carbon”with “Alkaline”)4. Do not attempt to charge, short-circuit, disassemble,heat or burn used batteries.5. Battery replacement is necessary when remotecontrol acts sporadically or stops operating theDisplay set6. Do not burn or breakup batteries7. Batteries must not be exposed to excessive heatsuch as sunshine, fire or the like.VESA MountingTo mount this Display to a wall, you will have to obtain astandard wall-mounting kit (commercially available). Werecommend using a mounting interface that complieswith TUV-GS and/or UL1678 standard in North America.TH-49LFV8TH-55LFV8Protective SheetVESA Grid Tabletop standTableProtective SheetVESA Grid Tabletop standTable1. Lay a protective sheet on a table, which waswrapped around the Display when it was packaged,beneath the screen surface so as not to scratch thescreen face.2. Ensure you have all accessories for mounting thisDisplay (wall mount, ceiling mount, table stand, etc).3. Follow the instructions that come with the basemounting kit. Failure to follow correct mountingprocedures could result in damage to the equipmentor injury to the user or installer. Product warrantydoes not cover damage caused by improperinstallation.4. For the wall-mounting kit, use M6 mounting screws(having a length 10 mm longer than the thickness ofthe mounting bracket) and tighten them securely.English10