Panasonic TH-42PF30U Operating Instructions Manual

Also see for TH-42PF30U: Operating instructions Service manual

Contents

Panasonic TH-42PF30U Operating Instructions Manual Manual pdf 65 page image

65Notes:• To use a DHCP server, make sure the DHCP serveris started.• During a DHCP server is used, IP ADDRESS,SUBNET MASK, and GATEWAY values cannot beentered.• When the set values are changed properly,“NETWORK SETTING CHANGED.” message andthe changed set items are displayed.Item DetailsDHCP Set to ON when a DHCP server isused, or OFF when it is not used.IP ADDRESS Enter an IP address.SUBNET MASK Enter a subnet mask.GATEWAY Enter a gateway address.PORTEnter the port number used forcommand control. The availablesetting range is 1024 - 65535.LAN SPEED Set the connection speed of the LANenvironment.NETWORK ID Set the ID to identify this unit. Theavailable setting range is 0 - 99.SAVE Save the each set value.Notes:• The default password is “Panasonic”.• Up to 32 alphanumeric characters can be used for apassword.• When the password is changed properly, “Passwordhas changed.” message is displayed.Item DetailsOLDPASSWORD Enter the old password.NEWPASSWORD Enter the new password.NEWPASSWORD(RETYPE)Enter the password entered in “NEWPASSWORD” for conrmation.SAVESave the new password. Theconrmation screen is displayed.Click OK to change the password.Click NETWORK SETTING from the menu. Various settings of a network can be set. For the details of the settingitems, please check NETWORK SETUP under the SET UP of the unit. (see page 53)Click CHANGE PASSWORD from the menu. Password to access the Web browser control can be set. Whenthe password is changed in this screen, the password used for command control and the PJLink™ securityauthentication is also changed.NETWORK SETTING (Network Setup Screen)Password Setting (Password Setup Screen)Using Web Browser Control