99:99MONPRESENT TIME SETUPPRESENT TIME OF DAY MON 99:99SETPRESENT TIME OF DAYDAY2/2SET UPMULTI DISPLAY SETUPPORTRAIT SETUPSET UP TIMERNETWORK SETUPPRESENT TIME SETUPDISPLAY ORIENTATION LANDSCAPE35PRESENT TIME SETUP / SET UP TIMERPRESENT TIME SETUPThe timer can switch the Plasma Display ON or OFF.Before attempting Timer Set, conrm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME /POWER OFF TIME.Press to display the SET UP menu.Press to select SET UP TIMER or PRESENT TIME SETUP.Press to display the SET UP TIMER screen or PRESENTTIME SETUP screen.2Press to select DAY or PRESENT TIME OF DAY.Press to set up DAY or PRESENT TIME OF DAY.button: Forwardbutton: BackNotes:• Pressing “ ” or “ ” button once changes PRESENT TIME OF DAY 1 minute.• Pressing “ ” or “ ” button continuously changes PRESENT TIME OF DAY by 15 minutes.Press to select SET.Press to store PRESENT TIME SETUP.Notes:• SET cannot be selected unless PRESENT TIME OF DAY is set.• Unless setting the present time other than “99:99”, “DAY” and “PRESENT TIME OF DAY” cannotbe set.• The settings of “DAY” and “PRESENT TIME OF DAY” are reset when leaving the display turnedoff for about 7 days for the following reasons:Pressing switch of the unit to turn off the display.Disconnecting the AC cord.Interruption of power supply.112Press to select POWER ON TIME / POWER OFF TIME.Press to set up POWER ON TIME / POWER OFF TIME.button: Forwardbutton: BackNotes:• Pressing “ ” or “ ” button once changes POWER ON TIME/ POWER OFF TIME 1 minute.• Pressing “ ” or “ ” button continuously changes POWER ON TIME / POWER OFFTIME by 15 minutes.Press to select POWER ON FUNCTION / POWER OFF FUNCTION.Press to select ON.Note:Timer function will not work unless “PRESENT TIME OF DAY” is set.210:000:00SET UP TIMERPOWER OFF FUNCTIONPOWER ON FUNCTION OFFOFFPRESENT TIME OF DAY 99:99POWER OFF TIMEPOWER ON TIMESET UP TIMER