Panasonic TH-42PF30U Operating Instructions Manual

Also see for TH-42PF30U: Operating instructions Service manual

Contents

Panasonic TH-42PF30U Operating Instructions Manual Manual pdf 50 page image

1/2SIGNALEXTENDED LIFE SETTINGSINPUT LABELSET UPOFFSTANDBY SAVE OFFPC POWER MANAGEMENT ONDVI-D POWER MANAGEMENT OFFOSD LANGUAGE ENGLISH (US)COMPONENT/RGB-IN SELECTRGBSCREENSAVERPOWER SAVENO SIGNAL POWER OFF ENABLENO ACTIVITY POWER OFF DISABLE3D SETTINGS3D Y/C FILTER (NTSC)COLOR SYSTEMSIGNALONAUTO3 : 2 PULLDOWN OFF[ VIDEO ]NOISE REDUCTION OFF3 : 2 PULLDOWNSIGNALOFF[ Digital ]NOISE REDUCTION OFFH-FREQ.V-FREQ.kHzHz63.9860.02DOT CLOCK FREQ. MHz108.0SIGNAL FORMAT 1280×1024/60iSIGNAL [ COMPONENT ]XGA MODE AUTONOISE REDUCTION OFFH-FREQ.V-FREQ.kHzHz63.9860.02SIGNAL FORMAT 1280×1024/60iSYNC3 : 2 PULLDOWNAUTOOFFSYNCSIGNALH-FREQ.V-FREQ.kHzHz63.9860.02SIGNAL FORMAT 1280×1024/60i[ RGB ]3 : 2 PULLDOWNXGA MODENOISE REDUCTION OFFAUTOOFFAUTO• 3D Y/C FILTER (NTSC)This menu is displayed when BNC Dual Video TerminalBoard (TY-FB9BD) is installed to the unit.Set this menu when the moving image looks unnaturalduring Video (S Video) input signal.ON OFFNote:When ON, this setting only affects NTSC input signals.• COLOR SYSTEMAUTO SECAM M.NTSC NTSCPALSet the color system to match the input signal. When “AUTO” is set, COLOR SYSTEM will be automatically selectedfrom NTSC/PAL/SECAM/M.NTSC.To display PAL60 signal, select “AUTO” or “PAL”.If the image becomes unstable:With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases becomeunstable. Should this occur, set the system to match the format of the input signal. 3:2 PULLDOWNWhen “ON”, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, whichare recorded at 24 frames per second.If the picture is not stable, turn the setting to “OFF”.ON OFFNote:When ON, this setting only affects the following signal input:• NTSC / PAL signal input during Video (S Video) input signal.• 525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.• XGA MODEThis menu is displayed when the input signal is analog (Component/PC).This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and samplingrates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).AUTO 1024×768 1280×768 1366×768AUTO: Automatically selected from 1024×768/1280×768/1366×768.Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.Note:After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS./SIZE” menu asnecessary. (see page 26)50Press to select the menu to adjust.Press to adjust the menu.Press to exit from adjust mode.Note:“SIGNAL” setup menu displays a different setting condition for each input signal.34SET UP for Input SignalsSIGNAL menuFor VIDEO (S VIDEO)Press to display the SET UP menu.Press to select the “SIGNAL”.Press to display the SIGNAL menu.21For RGBFor COMPONENT For DigitalPress ACTION ( ) button