H-Freq.V-Freq.kHzHz63.9860.02Signal Format 1280×1024/60SyncSignal [ RGB ]Cinema realityXGA ModeAutoOffAutoH-Freq.Dot Clock Freq.kHzMHz63.98108.0V-Freq. Hz60.02Signal Format 1280×1024/6051This function operates only during input from PC IN terminal.Select Signal from the “Setup” menu during RGB or Component input signal.Setting RGB sync signalCon rm that the input is set to RGB input (this setting is valid only for RGB input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.on G: Uses a synchronized signal on the Video G signal, which is input from the G connector.VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector.Setting Component sync signalCon rm that the input is set to Component input (this setting is valid only for Component input signal).Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.on Y: Uses a synchronized signal on the Video Y signal, which is input from the Y connector.Note:Accepts only RGB signals from COMPONENT/RGB IN terminal with “Sync on G”.SyncSetup for Input SignalsPress to select the “Sync”.Press to adjust.Displays the frequency and the type of the current input signal.This display is valid only for Component / RGB / PC and Digital input signal.Display range:Horizontal 15 - 110 kHzVertical 48 - 120 HzThe dot clock frequency is displayed during digital signal input.Input signal displayCinema realitySignalOffNoise reduction Off[ Digital ]SDI Through OffSet the active through function of the Dual Link HD-SDI Terminal Board (TY-FB11DHD).Note:Settings can only be performed for this menu when a slot mounted with a Dual Link HD-SDI Terminal Board(TY-FB11DHD) is selected.SDI ThroughPress to select the “SDI Through”.Press to select “On” or “Off”.On: Enables active through.Off: Disables active through.