Panasonic TH-42PF20 Operating Instructions Manual

Contents

Panasonic TH-42PF20 Operating Instructions Manual Manual pdf 49 page image

Cinema reality OffyXGA Mode Auto3D Y/C Filter (NTSC)Colour systemSignalOnAutoCinema reality Off[ AV ]Noise reduction Off49Setup for Input SignalsColour systemSelect Signal from the “Setup” menu during Video (S Video) input signal. (“Signal [AV]” menu is displayed.)Press to select the “Colour system”.Press to select each functions.If the picture image becomes unstable:With the system set on Auto, under conditions of low level or noisy input signals the image may in rare casesbecome unstable. Should this occur, set the system to match the format of the input signal.Cinema realityPress to select Cinema reality.Press to set On / Off.Cinema reality:When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, whichare recorded at 24 frames per second. If the picture is not stable, turn the setting to off.Note:When On, this setting only affects the following signal input:• NTSC / PAL signal input during “AV (S Video)” input signal.• 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during “Component” input signal.Note:After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu asnecessary. (see page 24)XGA ModeThis menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals with60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and1,366 × 768 @ 60Hz).Press to select “XGA Mode”.Press to select “Auto”, “1024×768”, “1280×768” , “1366×768”.Auto: Automatically selected from 1024×768/1280×768/1366×768.Switch the setting to suit the input signal for better displaydepends on the angle of view or display resolution condition.Colour system: Set the colour system to match the input signal. When “Auto” is set, Colour system will beautomatically selected from NTSC/PAL/SECAM /M.NTSC.To display PAL60 signal, select “Auto” or “PAL”.Auto SECAM M.NTSC NTSCPAL