Panasonic TH-42PF20 Operating Instructions Manual

Contents

Panasonic TH-42PF20 Operating Instructions Manual Manual pdf 48 page image

3D Y/C Filter (NTSC) OnCinema realitySignalOffH-Freq.Dot Clock Freq.kHzMHz63.98108.0V-Freq. Hz60.02Noise reduction Off[ Digital ]Signal Format 1280×1024/60SyncSignalH-Freq.V-Freq.kHzHz63.9860.02Signal Format 1280×1024/60Cinema realityNoise reductionXGA ModeAutoOffOffAuto[ Component ]SyncSignalH-Freq.V-Freq.kHzHz63.9860.02Signal Format 1280×1024/60[ RGB ]Cinema realityNoise reductionXGA ModeAutoOffOffAuto1/2SignalScreensaverExtended life settingsInput labelOffStandby save OffPC Power management OffDVI-D Power management OffAuto power off OffOSD Language English (UK)Component/RGB-in selectRGBPower saveSetup483D Y/C Filter – For NTSC AV imagesThis menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit.Select “Signal” from the “Setup” menu during Video (S Video) input signal. (“Signal [AV]” menu is displayed.)Press to select the “3D Y/C Filter (NTSC)”Press to set On / Off.Note:When On, this setting only affects NTSC input signals.Setup for Input SignalsSignal menuPress ACTION ( ) buttonFor Video (S VIDEO) For RGBFor Component For DigitalPress to select the menu to adjust.Press to adjust the menu.Press to exit from adjust mode.34Press to display the Setup menu.Press to select the “Signal”.Press to display the Signal menu.21Note:“Signal” setup menu displays a different setting condition for each input signal.3D Y/C Filter (NTSC)Colour systemSignalOnAutoCinema reality Off[ AV ]Noise reduction Off