Panasonic TH-42LFP30W Operating Instructions Manual

Also see for TH-42LFP30W: Brochure Specification Operating instructions Service manual

Contents

Panasonic TH-42LFP30W Operating Instructions Manual Manual pdf 46 page image

3D Y/C FilterColour systemSignalOnAutoCinema reality Off[ AV ]Noise reduction Off38Setup for Input SignalsColour systemSelect Signal from the “Setup” menu during Video input signal. (“Signal [AV]” menu is displayed.)Press to select the “Colour system”.Press to select each functions.If the picture image becomes unstable:With the system set on Auto, under conditions of low level or noisy input signals the image may in rare casesbecome unstable. Should this occur, set the system to match the format of the input signal.Cinema reality OffCinema realityPress to select Cinema reality.Press to set On / Off.Cinema reality:When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, whichare recorded at 24 frames per second. If the picture is not stable, turn the setting to off.Note:When On, this setting only affects the following signal input:• NTSC / PAL signal input during Video input signal.• 525i (480i), 625i (575i), 1125 (1080) / 60i signal input during Component input signal.Colour system: Set the colour system to match the input signal. When “Auto” is set, Colour system will beautomatically selected from NTSC/PAL/SECAM/NTSC 4.43/PAL M/PAL N.To display PAL60 signal, select “Auto”.yXGA Mode 1024 × 768Note:After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu asnecessary. (see page 22)XGA ModeThis menu is displayed when the input signal is analog (Component/PC). This menu sets two types of XGA signalswith 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and1,366 × 768 @ 60Hz).When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @60Hz XGA input signal irrespective of this setting.Press to select “XGA Mode”.Press to select “1024×768”, “1366×768”.Auto SECAM NTSC PAL M PAL NNTSC 4.43PAL