Panasonic TH-42LFP30W Operating Instructions Manual

Also see for TH-42LFP30W: Brochure Specification Operating instructions Service manual

Contents

Panasonic TH-42LFP30W Operating Instructions Manual Manual pdf 33 page image

25Picture AdjustmentsNotes:• “Colour” setting can be adjusted for Videoinput signal.• You can change the level of each function(Backlight, Contrast, Brightness, Colour, Tint,Sharpness) for each Picture Mode.• The setting details for normal, dynamicand cinema respectively are memorizedseparately for each input terminal.• The “Tint” setting can be adjusted for NTSCsignal only during Video input signal.• In Contrast, there is not a noticeable changeeven when contrast is increased with a brightpicture or reduced with a dark picture.Advanced settingsOn the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time orthe ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.Helpful Hint ( / Normalise Normalisation)Item Effect AdjustmentsBacklight Darker BrighterAdjusts luminance of the backlight.Contrast Less MoreSelects the proper brightnessand density for the room.Brightness Darker BrighterAdjusts for easier viewing ofdark pictures such as nightscenes and black hair.Colour Less More Adjusts colour saturation.Tint Reddish Greenish Adjusts for nice skin colour.Sharpness Less More Adjusts picture sharpness.Notes:• Carry out “W/B” adjustment as follows.1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.2. Adjust the white balance of the dark sections using the “W/B Low R” , “W/B Low G” and “W/B Low B” settings.3. Repeat steps 1 and 2 to adjust.Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.• The adjustment values are memorized separately for each input terminal.• The adjustment range values should be used as an adjustment reference.Item Effect DetailsInput level Less More Adjustment of parts which are extremely bright and hard to see.Gamma Down Up S Curve 2.0 2.2 2.6AGC Off On Increases the brightness of dark signal automatically.W/B HighR Less More Adjusts the white balance for light red areas.W/B HighG Less More Adjusts the white balance for light green areas.W/B HighB Less More Adjusts the white balance for light blue areas.W/B Low R Less More Adjusts the white balance for dark red areas.W/B Low G Less More Adjusts the white balance for dark green areas.W/B Low B Less More Adjusts the white balance for dark blue areas.