- 66 -● When the operation is completed, the channel at the lowest position willbe displayed.● This setting is applicable only for the selected TV mode.■ Auto Tuning using the buttons on the TV1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds todisplay the menu.2. Set Auto Tuning with following control panel buttons.● Move the cursor / select from a range of options / select the menu item(up and down only)● Access the menu / store settings after adjustments have been made oroptions have been set with INPUT/OK/HOLD for MENU buttonManual Tuning■ Digital TVNormally use Auto Tuning or Update Channel List to retune Digital TVchannels.If tuning has not been done completely or for adjusting the direction of theaerial, use this function.● All Digital TV channels found will be added to Channel List.1. Select physical channel with / and select offset with / .2. Press OK to search.■ Analogue TVSet Analogue TV channel manually after Auto Tuning.1. Select the channel position with Numeric buttons.2. Select the channel with Channel Up / Down.3. Search with / .4. Select Store with / and press OK to set.● If a VCR is connected only with the RF cable, select channel position 0.
