- 56 -Timer ProgrammingThis function allows you to select programmes that you want to be remindedto watch or record to the USB HDD.1. Select the forthcoming programme with / / / and press OK toaccess.2. Select USB HDD Rec. / Reminder with / and press OK to set.● To check / change / cancel a timer eventRecording > Timer Programming > Editing Timer Programming● LED will turn to orange in Standby mode if Timer Programming is set.● To return to TV GuideRETURN● If you select the current programme, a confirmation screen askingwhether you want to watch or record the programme appears. SelectTimer Programming with / and press OK to set USB HDD Rec. torecord from the time you finish the timer event setting.= Note =● Not valid in Analogue TV● Timer Programming only works reliably if correct time information isreceived via the signal from the broadcaster or service provider.● No other channels can be selected while the recording of TimerProgramming is in progress.● When recording programmes to the USB HDD, be sure to format the USBHDD and enable it to record in USB Device Setup.Recording > USB HDD setup● To set timer programming events of this TV on the network equipment(smartphone, etc.) from outside the home networkRecording > Timer Programming > Remote recording
