- 31 -Watching external inputConnect the external equipment (VCR, DVD, etc.) and you can watch throughthe input.1. Display the input selection menu with AV.2. Select the input mode connected to the equipment with / and pressOK to watch. (The selected mode is displayed on the top left of thescreen.)● You can also select the input pressing AV. Press repeatedly until thedesired input is selected.● To switch between COMPONENT and VIDEO in AV, select with / .● You can label or skip each input mode. Skipped inputs will not bedisplayed when AV is pressed. (Input Labels)● The remote control is capable of operating the contents or externalequipment.Watching > External equipment > Operating with TV’s remote control● To return to TV modeTV= Note =● If the external equipment has an aspect adjustment function, set it to 16:9.● For details, read the manual of the equipment or ask your local dealer.■ Input LabelsAccesses the input labels list to select the label of each input mode or set toskip unconnected one for easier identification and selection in Input Selectionor banner.Watching > Basic > Information banner1. Display the menu with MENU.2. Select Setup > Display Settings > Input Labels with / and press OKto access.3. Set with / / / and press OK to set.● To name each input mode freely, select User input and set characters(maximum 10 characters).● To skip the input mode, select Skip.