Panasonic TC-11LV1 Operating Instructions Manual

Contents

Panasonic TC-11LV1 Operating Instructions Manual Manual pdf 52 page image

52Initial settings Setting on screen DISPLAYPress the SELECT ( , ) button to select DISPLAY menu .Press the SELECT ( , ) button to select each item and press ENTER button.DISPLAY MENUENGLISHPOS 1ONRETURNENTERSETUPDISPLAYMENU LANGUAGEOSD POSITIONOSD MESSAGESRETURNENTERSETUP MENU LANGUAGEENGLISHFRANÇAISESPAÑOLRETURNENTERSETUP OSD POSITIONPOS 1POS 2RETURNENTERSET UP OSD MESSAGESONOFFRETURNENTERSETUP OSD MESSAGESONOFF Setting AUDIO [DVD]Press the SELECT ( , ) button to select AUDIO menu .Press the SELECT ( , ) button to select each item and press ENTER button.AUDIO MENUOFFSTANDARDONRETURNENTERSETUPAUDIODIGITAL AUDIO OUTD. RANGE COMPRESS.AUDIO DURING SRCHRETURNENTERSETUP DIGITAL AUDIOOUTOFFBITSTREAMLPCM1212You can change the language used for the on screen displaymenus.ENGLISH: SELECTED as onscreen language.FRANÇAIS: SELECTED as onscreen language.ESPAÑOL: SELECTED as onscreen language.POS 1: Display appears at the position on the top side of thescreen.POS 2: Relative to "Position 1", the display appears at thebottom.(Select this for example, when part of the display ismissing.)This is used to turn the display of functions like "PLAY" and"STOP" on or off.ON: Functions like "PLAY" and "STOP" are displayed onthe television screen.OFF: Functions like "PLAY" and "STOP" are not displayedon the television screen.Digital audio output setting• This is for selecting the type of digital audio signal output fromthe optical digital audio output terminal of this device,according to the connection method with other equipment.OFF: For analog connection of audio output ➠ Set to "OFF".BITSTREAM: When connecting with digital equipment with abuilt-in Dolby digital decoder or DTS decoder ➠Set to "BITSTREAM".LPCM: When connecting with digital equipment without a built-inDolby digital decoder or DTS decoder ➠ Set to "LPCM".When playing back a DVD recorded at LPCM 96 kHz using 96 kHzsampling, perform analog connection by setting to "OFF". Opticaldigital output is not compatible in this case. (When "BITSTREAM" or"LPCM" is selected, downsampling to 48 kHz is done for both opticaldigital output and analog output.)CAUTION:• When performing digital connection with equipment without abuilt-in Dolby digital decoder or DTS decoder, be sure to setto "LPCM".• If setting is not done correctly, noise will be generated, andthis may hurt your ears or damage speakers.• To return to the previous screen, press RETURN button.• To return to the previous screen, press RETURN button.See next pageSee next page