51Initial settings Setting TV screen aspectSelect the aspect, conventional size screen (4:3) or wide screen (16:9), when connecting to your TV set.Press the SELECT ( , ) button to select VIDEO menu and press ENTER button.Press the SELECT ( , )button to select aspect itemand press ENTER button.• Change the passwordPress the SELECT ( , ) button to select the CHANGEPASSWORD and press ENTER button.Input new password and press ENTER button.Press RETURN button to exit RATINGS menu.RETURNENTERSETUP RATINGSCHANGE LEVELCHANGE PASSWORDLEVEL 1RETURNENTERSETUP RATINGS2 2 2 2ENTER A NEWTHEN PRESS ENTER.4 - DIGIT PASSWORD.RETURNENTERSETUP RATINGS3 3 3 3REMEMBER THECANNOT CHANGETHE RATING LEVEL.PASSWORD. OR YOU16 : 9RETURNENTERSETUPVIDEOTV ASPECTVIDEO MENURETURNENTERSETUP TV ASPECT16 : 94 : 3 LETTERBOX4 : 3 PAN&SCAN12312 "16:9": Select when a wide screen TV set is connected. (Factory preset)Select this if the disc video type is 16:9. (For wide screen TV's,set the screen mode to "Full".)"4:3 LETTERBOX": Select when a conventional TV set is connected.Wide video with an aspect ratio like 16:9 is played backon the screen with black bands on the top and bottom."4:3 PAN&SCAN": Select when a conventional TV set is connected.Wide video with an aspect ratio like 16:9 is played backon the screen with either both sides or one side cut off.• If Pan & Scan or Letterbox is designatedbeforehand on the disc side, the disc designationtakes priority.