Panasonic SC-HTB500 Operating Instructions Manual

Also see for SCHTB500 - HOME THEATER AUDIO SYSTEM: Operating instructions Operating instructions

286 Thread a cord (not supplied) through the wall mount bracket.≥ Use a cord which is capable of supporting over 20 kg (44.1 lbs).A Rear of this unitB Fall prevention cord (not supplied)7 Attach the lock pins into the wall mount bracket.≥ The lock pins are designed to lock the wall mount brackets to the screws that this unit is attached to.Hence, preventing this unit from falling off the screws.≥ Keep the lock pins out of reach of children to prevent swallowing.≥ Insert the lock pins as illustrated in the image below.≥ Make sure that the lock pin does not get caught on the fall prevention cord.A Do not insert the lock pin farther than this point.8 Drive 2 screws (not supplied) into the screwing positions identified in step 4.A At least 30 mm (1 3/ 16q)B ‰4.0 mm (5 / 32q)C ‰7.8 mm to ‰9.4 mm ( 5/ 16q to 13 / 32q)D WallE 5.0 mm to 6.0 mm ( 3/ 16q to 1/ 4q)≥ Take care when fixing this unit to the wall. Always ensure that there are no electrical cables or pipesin the wall before hanging this unit.≥ Keep the screws out of reach of children to prevent swallowing.≥ Be sure to use commercially available screws with nominal diameter of ‰4.0 mm ( 5/32q) suited to the wall surface material(wood, steel frame, concrete, etc.) and also capable of supporting over 20 kg (44.1 lbs) each for attaching this unit to thewall.≥ The position in the wall where the screw is to be attached should be capable of supporting over 20 kg (44.1 lbs).≥ Improper attachment may result in damage to the wall and this unit.Attaching this unit to a wall  

/ 30

This manual is suitable for:

SCHTB500 - HOME THEATER AUDIO SYSTEM

Panasonic SC-HTB500 Operating Instructions Manual

Product

Learn More

Legal