Menu
Panasonic SC-HTB500 Operating Instructions Manual
Also see for SCHTB500 - HOME THEATER AUDIO SYSTEM: Operating instructionsOperating instructions
                              |
27 Installation Instructions3 Complete all the necessary connections to this unit. (> 11)≥ Connect the AC power supply cord to this unit, but do not connect it to the household AC outlet untilthe installation is completed.≥ For details, refer to the operating instructions for this unit.4 Use the measurements indicated below to identify the screwing positions onthe wall.A 36 mm (113 / 32q)B 72 mm (2 27 / 32q)C 108.5 mm (4 9 / 32q)D 812 mm (31 31/ 32q)≥ Position the unit with at least 20 mm (25/32q) of space above the unit and 100 mm (315/16q) on either side of the unit. If not, itwill not be possible to attach the unit to the wall.≥ Be sure that there is enough space above the unit and that the screw hole positions are level with each other beforedrilling into the wall.≥ Be sure to use a spirit level to ensure that both screwing positions are horizontal to each other.5 Checking the strength of the installation location.≥ Check the wall strength at the 2 screwing positions. If the strength at any of these positions is lacking,provide sufficient reinforcement.jThe position in the wall where the screw is to be attached should be capable of supporting over20 kg (44.1 lbs).ConnectionsPlacement |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved