Menu
Panasonic SC-HTB500 Operating Instructions Manual
Also see for SCHTB500 - HOME THEATER AUDIO SYSTEM: Operating instructionsOperating instructions
                              |
26ComponentsThe images shown in this installation instructions are for illustrative purpose only.Check the supplied components before starting.Commercially available components (not supplied)≥ Screws for wall mounting≥ Fall prevention cord≥ Screws to attach fall prevention cord to wall≥ Use commercially available screws with a nominal diameter of 4.0 mm ( 5/32q) that are suited to the wall material (wood, steelframe, concrete etc.) you are attaching the wall mount brackets to.≥ Product numbers correct as of May 2010. These may be subject to change.Installation procedureNever use any other method than specified to install.Preparation≥ To prevent damage or scratches, lay down a softcloth and perform the assembly on it.≥ Keep the screws out of reach of children toprevent swallowing.≥ Do not hold this unit in one hand to avoid injury by dropping this unit when carrying.1 On the rear of the unit:Place the wall mount bracket byaligning the holes in the wall mountbracket with the projecting parts A.2 Screw the wall mount bracket firmlyinto place.≥Screw tightening torque: 80 N0cm (17.98 lbf-ft) to120 N0cm (26.98 lbf-ft).≥Repeat the steps above when installing the secondwall mount bracket.∏ 2 Wall mount brackets(RYQX1034-K)∏ 2 AC power supply cord(RFAX1027)∏ 2 Screws(RYQX1042-1)∏ 2 Lock pins(RYQX1048)∏ 1 Digital transmitter(RFAX1032A)Attaching the wall mount brackets |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved