RQT791412Setting the ClockThis is a 24-hour clock.[1] Press [ ] to turn the unit on.[2] Press [CLOCK/TIMER] to select “CLOCK”.Each time you press the button:[3] Within 10 secondsTurn [TIME/PRESET TUNE TRACK SKIP ] toset the time or on remote control, press [–/:]or [9/+].[4] Press [CLOCK/TIMER] to start the clock.The original display is restored shortly after.Note:≥ The clock may lose or gain some time over a period.Readjust if necessary.To display the clockRemote control onlyPress [DISPLAY].The Play and Record TimerYou can set the timer to come on at a certain time to wake youup (play timer) or to record a radio station (record timer).Preparations:Turn the unit on and set the clock.For play timer, prepare the music source (tape/CD/radio) forlistening, and set the volume.For record timer, check the cassette’s erasure prevention tab(l 10) and load the cassette with the side for recording facingup. Tune to the radio station (l 7), and set the volume.To set the start and finish times[1] Press [CLOCK/TIMER] to select the desired timerfunction.ON PLAY: to set the play timerON REC : to set the record timerProceed to step [2] before these indicators stop flashing(about 10 seconds).[2] Turn [TIME/PRESET TUNE TRACK SKIP ] toset the start time and then press [CLOCK/TIMER].[3] Turn [TIME/PRESET TUNE TRACK SKIP ] toset the finish time and then press [CLOCK/TIMER].The start and finish times are now set.VOLUMETAPE ⁄ CDCLOCK # ## #]n( ]n,Original displayON PLAY OFF PLAYON RECOFF REC