Panasonic RX-D45 Operating Instructions Manual

Also see for RX-D45: Operating instructions Operating instructions

Contents

Panasonic RX-D45 Operating Instructions Manual Manual pdf 5 page image

5 RQTX1147DiscsBasic playBasic play1 Press [x, CD OPEN/CLOSE] to open the disc tray andthen load the disc with the label facing up.2 Press [x, CD OPEN/CLOSE] again to close.3 Press [4/9, CD] to start play.StopplaybackPress [8] (stop) during play.Pause play Press [4/9, CD] during play.Press again to resume play.Skip tracks Press [–/2] or [6/+].During RANDOM play, you cannot skip totracks that have been played.SearchthroughtracksPress and hold [–/2] or [6/+] during playor pause.• During program play (Z see below), orrandom play (Z see below, “Play Modefunction”), you can search only within thetrack.Play Mode functionPress [·PLAY MODE] repeatedly to select the desiredmode.1-TRACKREPEAT1-Play one selected track repeatedly on the disc.Press [–/2] or [6/+] to select the track.REPEAT Repeat play a disc or programmed tracks(Z see below).RANDOMRNDPlay a disc randomly.✒ NoteDuring “Program play”, “Play Mode function” cannot beactivated.Program playThis function allows you to program up to 24 tracks.1 Press [4/9, CD] and then [8] (stop).2 Press and hold [–PGM].“PGM” is displayed.3 Press [–/2] or [6/+] to select your desired track.4 Press [–PGM].Repeat steps 3 and 4 to program other tracks.5 Press [4/9, CD] to start play.Cancelprogram modePress and hold [–PGM] in the stop mode.Replay theprogramPress and hold [–PGM] then [4/9, CD] inthe stop mode.Check programcontentsPress [–/2] or [6/+] when “PGM” isdisplayed in the stop mode.Clear allprogrammedtracksPress and hold [8] (stop) in the stopmode.“CLEAR” is displayed.✒ Note• When you try to program more than 24 tracks, “FULL”appears.• You will not be able to add more tracks to the existingprogram. The existing program has to be cleared.• The program memory is cleared when you open the disc tray.✒ NOTE about using a DualDiscThe digital audio content side of a DualDisc does not meetthe technical specifications of the Compact Disc DigitalAudio (CD-DA) format so playback may not be possible.✒ NOTE on CDsChoose discs with this mark:• This unit can access up to 99 tracks.• This unit can play CD-DA format audio CD-R/RW thathave been finalised.• It may not be able to play some CD-R/RW due to thecondition of the recording.• Do not use irregularly shaped disc.• Do not use disc with labels and stickers that are coming offor with adhesive exuding from under labels and stickers.• Do not attach extra labels or stickers on the disc.• Do not write anything on the disc.Using the FM/AM radioManual tuningManual tuning1 Press [FM/AM] to select “FM” or “AM”.2 If “PGM” is displayed, press [TUNE MODE] to clear it.3 Press [–/2] or [6/+] to select the frequency of therequired station.To tune automaticallyPress and hold [–/2] or [6/+] until the frequency startschanging rapidly. The unit begins auto tuning, stoppingwhen it finds a station.• Auto tuning may not function when there is excessiveinterference.• To cancel auto tuning, press [–/2] or [6/+] onceagain.To improve receptionFM: Extend the whip antenna and adjust its direction.AM: Adjust the position of the unit.To improve FM sound qualityWhen “FM” is selectedPress [FM MODE] to display “MONO”.To cancelPress [FM MODE] again.• MONO is also cancelled if the frequency is changed.• Turn off “MONO” for normal listening.Memory presetMemory presetUp to 16 stations each can be set in the FM and AM bands.✒ PreparationPress [FM/AM] to select “FM” or “AM”.Automatic presettingPress and hold [–AUTO PRESET] to start presetting.The tuner presets all the stations it can receive into thechannels in ascending order. When finished, the last stationmemorised is tuned in.

/ 8

Related manuals for Panasonic RX-D45