Panasonic RX-D45 Operating Instructions Manual

Also see for RX-D45: Operating instructions Operating instructions

Contents

Panasonic RX-D45 Operating Instructions Manual Manual pdf 4 page image

4 RQTX1147Power sourcesUsing the household mains socketUsing the household mains socketAC mains lead(included)To householdmains socketConnect the AC mains lead firmly to the unit and the householdmains socket.✒ Note• The included AC mains lead is for use with this unit only. Donot use it with other equipment.• The unit is in the standby condition when the AC powersupply cord is connected. The primary circuit is always “live”as long as the power cord is connected to an electrical outlet.Using batteries (not included)Using batteries (not included)56781243Inner rowOuter rowPress towards while insertingthe battery.• The unit cannot be powered by batteries if the AC mains leadis connected. Disconnect the AC mains lead from the unit tooperate on battery power.• Use only alkaline batteries.When to change the batteriesWhen the battery indicator begins flashing, replace all 8 ofthe batteries. It is also a good idea to replace all the batteriesbefore recording.✒ NoteBefore any function starts, the battery indicator may flashalthough the batteries are not drained. The indicator will displayits current status when the unit is powered from the householdmains socket by using the AC mains lead.Memory back-upWhen the power supply is interrupted, the current time, timersettings and radio stations you have set are saved if you haveinserted back-up batteries (not included).These batteries do not power the unit.2134Inner rowOuter rowWhen to change the batteriesThe batteries last about a year.Connect the unit to AC power before replacing the batteries.Before connecting or disconnecting the AC mains lead, press[8/x, STOP/EJECT] to stop the tape and press [TAPE/OFF]to turn the unit off. The back-up batteries ware out faster if thecord is disconnected with the power still on.✒ NoteUse either alkaline or manganese batteries.Overview of controlsA MNBID FCG HLJKPDEOA Tape mode/standby switchUnit will be in standby mode.B OPR (operation) indicatorThe indicator lights up when the unit is turned on.C Clock or timer setting, play timer settingD SpeakersThese speakers do not have magnetic shielding. Do notplace them near televisions, personal computers or otherdevices easily influenced by magnetism.E Disc trayF Tuner (FM/AM) selection, auto preset selectionG Disc play or pauseH Stop disc playback, MONO selection for FM modeI Disc tray open or closeJ Play mode function, program function, tuning modeselectionK Track skip or search, check program content, presetchannel selection, tuning function, time adjustmentL Sound equalizer (EQ) selectionM Display panelN Volume controlO Cassette play operationsP Cassette deckHeadphone jack (PHONES)Plug type: Ø 3.5 mm stereo (not included)• Avoid listening for prolonged periods of time to preventhearing damage.• Excessive sound pressure from earphones and headphonescan cause hearing loss.PHONES