Panasonic PV-27DF4 Operating Instructions Manual

Panasonic PV-27DF4 Operating Instructions Manual Manual pdf 18 page image

18 For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfoPlease make all cable or antennaconnections before powering on.Plug the unit power cord into an AC walloutlet.Settings are madeautomatically. Whencomplete, this screenappears.If setup is incomplete,the following screenappears. Checkconnection ofAntenna/Cable to theRF in Terminal, thentry manually to set theclock as follows.a. Press ACTION on the Remote todisplay SET CLOCK Menu screen.b. Press ▲▼ to select the month andpress SET to set. In the samemanner, select and set the date, year,time, and DST (Daylight Saving Time).• Press ◄ repeatedly to move the cursor. Press▲▼ to make a correction.c. Press ACTION twice to start CLOCKand exit.POWERACTIONSETCH AUTO SET PROCEEDINGAUTO CLOCK SETPROCEEDINGCANCEL:STOP10/25/2004 MON 11:45AMDST:ONSETTING : CH 10AUTO CLOCK SETCOMPLETEDAUTO CLOCK SETIS INCOMPLETEPLEASE SET CLOCK BYPRESSING ACTION KEYSET CLOCK1/ 1/2004 THU 12:00AMDST:ONSELECT: SET:SETSTART :ACTIONSET CLOCK10/25/2004 MON 11:45AMDST:ONSELECT: SET:SETSTART :ACTIONCase 1Case 2Initial Setup (Ready to Play)• Function buttons are void during Initial Setup.• If Auto Clock Set takes more than 30 minutes,press STOP and perform settings manually. (Seepages 19-21.)SELECT▲▼◄►EJECTSTOPPOWER STOP• If you use a cable box, turn it on and set it to thePublic Broadcasting Service (PBS) channel inyour time zone. If you use a DSS receiver, itmust be turned off.Press POWER on the remote or unit. Autochannel and clock set starts.Initial Setup -Ready to Play-