Panasonic NV-GS320 Operating Instructions Manual

Also see for NV-GS320: Operating instructions Operating instructions

Contents

With a PC134VQT1A48ª Using on MacintoshOperating environment on iMovie 4/iMovie HDOS:With pre-installed;Mac OS X v10.3 to 10.4CPU:PowerPC G3 (400 MHz or higher), G4, G5Intel Core DuoIntel Core SoloInterface:DV (FireWire) terminal (IEEE1394.a)≥Supplied CD-ROM is available for Windowsonly.≥iMovie/iMovie HD, included with any newMacintosh or sold with iLife.≥For more information, please contact AppleComputer, Inc. athttp://www.apple.com.Copying still pictures on PCOS:With pre-installed;Mac OS X v10.3 to 10.41 Connect the movie camera to the personalcomputer via the supplied USB cable.2 Double-click [NO_NAME] or [Untitled]displayed on the desktop.≥Files are stored in [100CDPFP] folder in the[DCIM] folder.3 Using a drag-and-drop operation, move thepictures you want to acquire or the folderstoring those pictures to any differentfolder on the personal computer.To disconnect USB cable safelyDrag [NO_NAME] or [Untitled] disk icon to the[Trash], and then disconnect the USB cable.ª Notes≥Do not disconnect USB cable while the statusindicator of the movie camera is on. It mayfreeze the software or destroy the data intransfer.≥When the movie camera is switched to the PCconnection mode while it is connected to thepersonal computer, the operation mode of themovie camera cannot be switched. In this case,disconnect the USB cable. Switch the operationmode of the movie camera and reconnect thecable.≥If the movie camera is used as a Web Camera,the quality of the video to be exchanged willdepend on the Internet connection status.≥In the Web Camera mode, video (picture)cannot be recorded onto a tape or a card.≥In the Web Camera mode, the audio may beinterrupted in the midway of communicationdepending on the communication environmentor the performance of the personal computer.≥If you connect the USB cable while you operatea tape in the tape playback mode, the tape willbe stopped.≥If you connect the USB cable in the WebCamera mode (tape recording mode), the timecode indication, the SP/LP indication, or iconsdisappear.≥In the Web Camera mode (tape playbackmode), the operation icon is changed.≥If the movie camera is used as a Web Camerawhile virus checking software is running, themovie camera’s operation may stop midwaythrough. In this case, exit the Messenger,reconnect the movie camera and restart theMessenger.≥We recommend using AC adaptor as the powersource for the movie camera when connectingto the personal computer. Data may be lost ifthe battery power is lost while transferring.≥Do not delete the folders in a card. The cardmay not be recognized if deleted.≥If you install the USB Driver while the USB cableis being connected, or if you don’t follow theseoperating instructions, the movie camera will notbe recognized correctly. In this case, delete thedriver from [Device Manager] as describedbelow, uninstall the driver, and re-install it.Set the movie camera to tape recording mode,tape playback mode or PC connection mode,connect it to the personal computer, and delete[DVC] or [Web-Camera] from [Device Manager].