38Specifications BasicPower source: 12 V DC, PoE (IEEE802.3af compliant)Power consumption: 12 V DC: 630 mA, PoE: 7.6 W (Class 0 device)Ambient operating temperature: –30 °C - +50 °C {–22 °F - 122 °F} *1Ambient operating humidity: Less than 90 %Waterproof: Camera: IP66 (IEC60529)* Only when installation work specified in this book is properlyperformed and appropriate waterproof treatment is per-formedShock resistance: Compliant with 50 J IEC60068-2-75Monitor output (for adjustingthe angular field of view): VBS: 1.0 V [p-p]/75 Ω, composite signal, RCA jackEXT I/O terminal cable: ALARM IN1 / DAY/NIGHT IN,ALARM IN2 / ALARM OUTALARM IN3 / AUX OUT / EXPOSURE OUTx1 eachMicrophone/Line input cable: ø3.5 mm monaural mini jackInput impedance: Approx. 2 kΩFor microphone: Applicable microphone: Plug-in power typeSupply voltage: 2.5 V ±0.5 VFor line: Input level: Approx. –10 dBVAudio output cable: ø3.5 mm stereo mini jack (monaural output)Output impedance: Approx. 600 ΩLine levelDimensions: ø164 mm x 146 mm (H) x 191.5 mm (W){ø6-15/32" x 5-3/4" (H) x 5-9/16"(W)}(including protrusion of the base cover fixing screw)Weight: Approx. 1.8 kg {3.97 lbs}Finish: Main body: Aluminum die cast, light grayTransparent part (over the lens): Clear polycarbonate resin CameraImage sensor: 1/3 inch interline transfer CCDEffective pixels: 1 296 (H) x 976 (V) x 2Scanning area: 4.86 mm (H) x 3.65 mm (V) {3/16" (H) x 1/8" (V)}Scanning system: ProgressiveMinimum illumination: 1.3 megapixels modeColor: 1.0 lx {0.1 footcandle}, BW: 0.08 lx {0.008 footcandle}(F1.2, Auto slow shutter: Off (1/30 s), AGC: High,Super-Dynamic: Off)Color: 0.06 lx {0.006 footcandle},BW: 0.005 lx {0.0005 footcandle}* Converted value(F1.2, Auto slow shutter: Max. 16/30 s, AGC: High,Super-Dynamic: Off)

installation guide

Important safety instructions

Limitation of liability

Preface

About the user manuals

Trademarks and registered trademarks

Network security

Precautions

precautions for use

Precautions for Installation

Major operating controls and their functions

Preparations

using a two-gang junction box

Camera installation

adjust the camera

Connection

Configure the network settings

Troubleshooting

Specifications

Standard accessories

Panasonic NETWORK CAMERA WV-NW502S Installation Manual

Fixed Dome

Vandal-Resistant

Super Dynamic Technology Comparison Chart

i-Pro Network Camera Lineup Chart

Cameras

Recording Software

Network Camera Lineup Charts

Network Video Recorders

Encoders

Decoder

Management Server

Fixed Color

Digital Video Recorders

Accessories

network video recorders

Management Software Comparison Chart

Matrix Switcher

Management Software

Multiplexer/Quad

system controller

Color Monitors

WV-NW502S

operating instructions

Monitor images on a PC

About the "Live

Monitor images from multiple cameras

Record images on the SD memory card manually

Action at an alarm occurrence

Transmit images onto an FTP server

images fail to transmit using the FTP periodic image transmission function

Display the log list

About the log list window

Playback of images on the SD memory card

About the network security

Display the setup menu from a PC

How to operate the setup menu

About the setup menu window

Configure the basic settings of the camera Basic]

Configure the settings relating to the SD memory card [SD memory card]

Access copy images saved on the SD memory card onto the PC [SD memory card images]

Configure the settings relating to the logs [Log]

Configure the settings relating to images and audio Image/Audio]

Configure the settings relating to H.264 images JPEG/H.264]

Configure the settings relating to MPEG-4 images JPEG/MPEG-4]

Configure the settings relating to images, back focus and the privacy zone [Image/Privacy]

Set mask areas

Back focus setting (Back focus setup menu)

Configure the settings relating to audio [Audio]

Configure the multi-screen settings [Multi-screen]

Configure the alarm settings [Alarm]

Configure the settings relating to the alarm image [Alarm]

Configure the settings relating to the alarm output terminal [Alarm]

Change the AUX name [Alarm]

Set the VMD areas [VMD area]

Configuration of the settings relating to the mail notification [Notification]

Configure the settings relating to Panasonic alarm protocol [Notification]

Configure the setting relating to the image recognition [Advanced func.]

Configuration of the destination settings of the face detection [XML notification]

Configuration of the settings relating to the face detection [Face detection]

Configure the settings relating to the authentication User mng.]

Configure the settings relating to the host authentication [Host auth.]

Configure the settings relating to the priority stream [System]

Configure the settings of the servers [Server]

Configure the settings relating to the FTP server FTP]

Configure the settings relating to the NTP server NTP]

Configuring the network settings [Network]

Configure the settings relating to DDNS DDNS]

Configure the settings relating to SNMP SNMP]

Configure the settings relating to the FTP periodic image transmission [FTP img. trans.]

Panasonic NETWORK CAMERA WV-NW502S Installation Manual

Product

Learn More

Legal