Panasonic NETWORK CAMERA WV-NW502S Installation Manual

Also see for WV-NW502S: Product catalog Product catalog Comparison chart Operating instructions Specifications

Panasonic NETWORK CAMERA WV-NW502S Installation Manual Manual pdf 10 page image

10PrecautionsRefer installation work to the dealer.Installation work requires technique andexperiences. Failure to observe this maycause fire, electric shock, injury, or damageto the product.Be sure to contact the dealer for installation,relocation and power supply work.Stop the operation immediately whensomething is wrong with this product.When smoke goes up from this product orthe smell of smoke comes from this product,stop the operation immediately and contactyour dealer.Turn the power off immediately and contactqualified service personnel for service.Do not attempt to disassemble or modifythis product.Failure to observe this may cause fire or elec-tric shock.Consult the dealer for the repair or inspec-tions.Do not insert any foreign objects.This could permanently damage this product.Turn the power off immediately and contactqualified service personnel for service.Select an installation area that can sup-port the total weight.Selecting an inappropriate installation sur-face may cause the product to fall down ortopple over, resulting in injury.Installation work shall be started after suffi-cient reinforcement.Periodic inspections shall be conducted.Rust on the metal parts or screws may causea fall of the product resulting in injury or acci-dents.Consult the dealer for the inspections.Do not use this product in an inflammableatmosphere.Failure to observe this may cause an explo-sion resulting in injury.Avoid installing this bracket in the loca-tions where salt damage occurs or corro-sive gas is produced.Otherwise, the mounting portions will deterio-rate and accidents such as a fall of this prod-uct may occur.Install this product at a vibration-freeplace.Failure to observe this may cause accidentsincluding falling.Failure to observe this may cause screwsand bolts to be loosened resulting in injurydue to their falling.The installation place shall be highenough not to interfere with people orobject moving.Failure to observe this may cause accidentsincluding falling.Do not strike or give a strong shock to thisproduct.Failure to observe this may cause injury orfire.Turn off the power before wiring.Failure to observe this may cause electricshock. In addition, a short circuit or wrongwiring may cause fire.The exclusively designed mount bracketshall be used.Failure to observe this may cause a dropresulting in injury or accidents.Use the exclusively designed mount bracketfor installation.The screws and bolts shall be tightened tothe specified torque.Failure to observe this may cause a dropresulting in injury or accidents.Do not rub the edges of metal parts withyour hand.Failure to observe this may cause injury.