Panasonic NC-ZA1 Operating Instructions Manual

Also see for NC-ZA1: Operating instructions

Contents

EN10Parts Names and HandlingInstructions (Continued)Coffee bean containerPowder coffeeshaft Grinding settingleverCoffee beancontainer lidPowder coffeeshaft lidSetting the grinding finenessTurn the grinding setting lever to the desired level of fineness.Only set the grinding fineness when the grinder is running.During grinding, do not touch coffee beans or put fingers intothe grinder. Close the coffee bean container lid after adjustingthe lever.Fine ground for “Intensive taste”.Use this setting for light roasted coffee beans.Medium ground for “normal taste”.Use this setting for medium roasted coffeebeans.Coarse ground for “mild taste”.Use this setting for dark roasted coffee beans.• Taste does not meet at your desire right away.Wait for a few times brewing to get desire taste.To attach the bean container extensionO If you desire to increase the capacity of the standard coffee bean container from 125 g to 250 g, proceedas follows.1 Remove the coffee bean container lid from its holder.2 Remove the powder coffee shaft lid by opening it to an upright position and pulling it out of itsholder.3 Put the bean container extension onto the coffee bean container.Make sure that the grinding setting levers are at the same position each other.4 Attach the powder coffee shaft lid and close the coffee bean container lid.Water tankHelps to keep in mind changing time of the filtercartridge.IN: Time the filter cartridge was attached.OUT: Time to change the filter cartridge.1 Attach the adapter to the filtercartridge.2 Insert the filter cartridge with theadapter into the guides as theillustration.* sold separatelyNote• The cartridge must be from BRITA INTENZA.Similar INTENZA from different manufacture will not fit to thisespresso machine.Filter time controlWater tank lid Filter cartridge* AdapterLift up the lid toopen.