Programming22 For assistance, please visit http://www.panasonic.com/helpSpecial instructions forprogrammable settingsCall restrictionYou can restrict the unit from dialingphone numbers beginning withspecified digit(s) (1 digit or 2 digits).Phone numbers with the restrictedleading digits cannot be dialed out,except the emergency numbers (#)stored in the phonebook, one-touchdial and speed dial.≥ When call restriction is turned on, youcannot store, edit, or erase the emergencynumbers begin with # in the phonebook,one-touch dial and speed dial.Setting the call restriction1 {PROGRAM/EXIT}2 {4} / {3}: “Program ?” > {OK}3 {4} / {3}: “Call restrict ?”> {OK}≥ If you have not changed the unitpassword (default: 1111), go tostep 5.4 Enter the unit password > {OK}5 Enter the number(s) (1 digit or 2digits) you want to restrict({0} to {9}) > {OK}> {PROGRAM/EXIT}Erasing the restricted number1 {PROGRAM/EXIT}2 {4} / {3}: “Program ?” > {OK}3 {4} / {3}: “Call restrict ?”> {OK}≥ If you have not changed the unitpassword (default: 1111), go tostep 5.4 Enter the unit password > {OK}5 Press and hold {CLEAR}> {OK} > {PROGRAM/EXIT}Changing the unit passwordImportant:≥ If you change the password, pleasemake note of your new password. Theunit will not reveal the password to you. Ifyou forget your password, consult yournearest Panasonic service center.1 {PROGRAM/EXIT}2 {4} / {3}: “Program ?” > {OK}3 {4} / {3}: “Changepassword?” > {OK}4 Enter the current 4-digit password(default: “1111”) > {OK}≥ If you have entered the wrongpassword, “ERROR” and “----” willbe displayed. Enter the correctpassword.5 Enter the new 4-digit password >{OK} > {PROGRAM/EXIT}KX-TS880.book Page 22 Friday, October 15, 2010 5:04 PM