Useful InformationAnswering SystemPreparation57Mailbox FeaturesFor assistance, please call: 1-800-211-PANA(7262)Telephone SystemSetting the Mailbox Password (for Mailbox 2 and 3)You can use Mailbox 2 or 3 as personal mailboxes. To prevent unauthorized peoplefrom accessing your mailbox and listening to your messages, assign a2-digit password (00–99) to Mailbox 2 or 3. Each password and the remote code(p. 66) must be unique. Once a password is assigned to Mailbox 2 or 3, no one canlisten to messages without entering the password.To confirm the password, repeat steps 1 to 5.• The password is displayed. When finished, press [OFF].To erase the passwordPress the soft key ( ) in step 6, press the soft key ( ), and press[OFF].• You can access the mailbox without entering the password.1 Press [MENU].2 Scroll to “Initial setting” by pressing[d] or [B], then press the soft key ( ).3 Press the soft key ( ) at “Setanswering”.4 Scroll to “Set mailbox2&3” by pressing[d] or [B], then press the soft key ( ).5 Select the mailbox by pressing [B] (Mailbox2) or [d] (Mailbox 3).6 Enter a 2-digit password (00–99).• If you entered the wrong password, re-enter thecorrect one.7 Press the soft key ( ).• If the handset beeps 3 times, you entered the same password as the othermailbox or the remote code (p. 66), or you entered a one-digit password.Start again from step 6 and select another password.8 Press [OFF].HandsetSELECT Initial settingSELECTSet answeringSELECT Set mailbox2&3Set password^=Mailbox2V=Mailbox3Set passwordMailbox2 :22Ex. Entered 22.SAVECLEAR SAVE