Using the Caller List38Storing Caller Information in the Phone BookCaller names and phone numbers that are in the Caller List can be stored in thephone book.• You cannot store Caller List items in the phone book if a phone number is notdisplayed.Erasing Caller InformationTo erase a specific caller To erase all entries1 Press the soft key ( ), [d], or [B] to enter the Caller List.2 Scroll to the desired caller by pressing [d] or [B].• If the number requires editing, see page 36.3 Press the soft key ( ).• If there is no name information for the caller, “Enter name” will bedisplayed.— You can enter a name by performing the following steps:(1) enter the name (p. 40),(2) press [d], and(3) press the soft key ( ).— If a name is not required, press [d], then press the soft key ( ).• To continue storing other items, repeat from step 2.• To exit programming mode, press [OFF].HandsetC I DSAVESAVESAVEHandset1 Press the soft key ( ),[d], or [B] to enter the CallerList.2 Scroll to the desired caller bypressing [d] or [B].3 Press the soft key ( ).• “Erased” is displayed.• To erase other items, repeatfrom step 2.• To exit the Caller List, press[OFF].C I DERASE1 Press the soft key ( ),[d], or [B] to enter the CallerList.• Before erasing all entries, makesure that “0 missed call” isdisplayed.2 Press the soft key ( ).• “All erase?” is displayed.• To cancel erasing, press the softkey ( ).3 Press the soft key ( ).• “All erased” is displayed andall entries in your Caller List areerased.C I DERASEN OYES