Panasonic KX-TG5471S Operating Instructions Manual

Contents

Useful InformationAnswering SystemTelephone System21Programmable SettingsFor assistance, please call: 1-800-211-PANA(7262)PreparationBase unit ringer tone (use either the handset or the base unit)Make sure the base unit is not being used.Selecting the base unit ringer tone by using theLCD ContrastThere are 6 levels of LCD contrast. The factory preset is “level 3”.1 Press [<] or [>].• The base unit will ring using the current ringer tone. If the ringer volume hasbeen turned off, the base unit will not ring (p. 20).2 Press [<] or [>] repeatedly to select the desired tone.• Each time you press [<] or [>], another ringer tone will be heard and selected.• To stop ringing, press [STOP].• You can also select the ringer tone by pressing [1] to [7].[1] to [3]: Bell ringer patterns [4] to [7]: Melody patterns1 Press [MENU].2 Scroll to “Initial setting” by pressing [d] or [B], then press thesoft key ( ).3 Scroll to “Set base unit” by pressing [d] or [B], then press thesoft key ( ).4 Press the soft key ( ) at “Ringer tone”.5 Follow steps 4 and 5 of “Handset ringer tone” on page 20.• When selecting the ringer tone, the base unit will ring. If the base unit ringervolume has been turned off (p. 20), the base unit will not ring.1 Press [MENU].2 Scroll to “Initial setting” by pressing[d] or [B], then press the soft key ( ).3 Scroll to “LCD contrast” by pressing [d] or[B], then press the soft key ( ).4 Select the desired contrast by pressing [d]or [B].• The contrast will change.• The number of steps indicates the contrast level.5 Press the soft key ( ), then press [OFF].Base UnitHandsetSELECTSELECTSELECTHandsetSELECT Initial settingSELECT LCD contrastLCD contrastLow HighEx. Level 3SAVE