Panasonic KX-TDA0490 Programming Manual

Also see for KX-TDA0490: Getting started Getting started

Contents

Panasonic KX-TDA0490 Programming Manual Manual pdf 65 page image

3.3 Data ManagementProgramming Guide 653.3.2 Handling of Firmware Page1. Click 2.2 Handling of Firmware Page in the main menu.For details about the parameters on this screen, refer to the descriptions below.2. Click Main Operation Mode for Operation to set the desired page as the active page on startup.NoteDo not click Empty, as it is an option provided for engineer use only.At any time during the session, you can:• Click MENU to return to the main menu (see "3.1 Main Menu for the Installer").• Click LOGOUT to log out from the IP-GW16 Maintenance Utility (see "3.4.2 Log Out").3. Click the option for the page in the "NEW" status for Select Page to specify it as the target pageof the operation.4. Click OK.You will see a confirmation screen.5. Click OK.You will see a result screen.6. Click OK.You will be taken back to the Handling of Firmware Page screen.Parameter DescriptionsParameter & Description Default Value RangeIP-GW16 Program VersionIndicates the version of the VoIP Gateway Card's mainprogram in the firmware data of the corresponding page.Display onlyDSP Program VersionIndicates the version of the VoIP Gateway Card's DSPprogram in the firmware data of the corresponding page.Display only