Panasonic KX-TDA0490 Programming Manual

Also see for KX-TDA0490: Getting started Getting started

Contents

Panasonic KX-TDA0490 Programming Manual Manual pdf 62 page image

3.3 Data Management62 Programming Guide3.3 Data ManagementThe upload and update operations of the firmware data are closely related. First follow the procedureas described in "3.3.1 Upload of Firmware Data" to upload new firmware data to the VoIP GatewayCard, and then go on to "3.3.2 Handling of Firmware Page" to update the card with the newlyuploaded firmware data.3.3.1 Upload of Firmware DataBefore uploading the data, place the card in the "STOP" status (see "3.2.1 Status Control").1. Click 2.1 Upload of Firmware data (PC → VoIP Gateway) in the main menu.2. Do the following to upload the firmware data to the temporary buffer in the VoIP Gateway Card:a. Click Browse and choose a file to upload.At any time during the session, you can:• Click MENU to return to the main menu (see "3.1 Main Menu for the Installer").• Click LOGOUT to log out from the IP-GW16 Maintenance Utility (see "3.4.2 Log Out").b. Click UPLOAD (PC→VoIP Gateway).The upload operation starts.NoteIf the upload operation is executed while the card is in the "RUN" status, you will see anerror screen. Click Change RUN/STOP status Screen and place the card in the"STOP" status (see "3.2.1 Status Control"), and then upload the data again.