1.5 During a Conversation1-44 OperationsTransferring a Call to an Outside (CO) Line(Call Transfer – to Outside (CO) Line)Allows you to transfer a received call to an external party.System Programming is required to execute this feature.PTPress TRANSFER. Enter the phonenumber where callswill be transferred.TRANSFER phone no.During a conversationHang up orpressSP-PHONE.Confirmation toneand dial toneAnnounce.Wait foran answer.line access codeCOPress a CO or entera line access code(9, 0 or 81 through 86).• The current call is placed on hold. • The call is transferred.• If a CPC or reverse signal is sent to an outside (CO) line before the assigned time limit, acall between two external parties will be disconnected.• If a call between two external parties is established, an alarm tone is sent to both parties15 seconds before the assigned time limit (default: 10 min.). “Hold Recall” is sent to thetransferring extension 50 seconds before time out.• If you want to return to the held call, press the TRANSFER button or corresponding CO orINTERCOM button before the destination party answers.• If you want to join the conversation after transferring the call, press the corresponding CObutton. A conference call is established.• To change the party where the call is transferred before hanging-up, press the CO buttonwhose indicator is flashing slowly to retrieve the call, then repeat the Call Transferprocedure.• See the Installation Manual, Section 3, “Call Transfer – to Outside (CO) Line”.PTPTPTPTPT!!+Technical Manuals Online! - http://www.tech-man.com
