1-24 Operations1.3 Making Calls• An account code must be stored by pressing “ ” and entering the account code after theline access code.• You can store an extension number, telephone number, or feature number of up to 16 digits.Valid digits are “0 through 9”.• A pause can be stored by pressing the key. However, in the account code verify-all,verify-toll and forced modes, “ ” is not regarded as a pause.• To store the telephone number of an external party, a line access code (9, 0 or 81 through86) must be stored as the first digit.• The number of Personal Speed Dialing numbers corresponds to the number of PF buttonsassigned as One-Touch Dialing. (PF buttons are on a proprietary telephone.) You cannotassign both the One-Touch Dialing and Personal Speed Dialing features to the samenumber. For example, if you assign One-Touch Dialing to the PF 1 button and then PersonalSpeed Dialing 0, only the Personal Speed Dialing 0 feature will be assigned.• A rotary telephone cannot use this feature.• 1.2 Proprietary Telephone Settings, “Customizing the Button on Your Telephone”,One-Touch Dialing Button• See the Installation Manual, Section 3, “Personal Speed Dialing”.SLTPT!!+Allows you to store up to 10 speed dial numbers at your extension. These numbers areavailable for your extension only.Storing a phone numberAny TelephoneConfirmationtoneLift the handsetor pressSP-PHONE/MONITOR .2 #Dial 2 . Enter the personal speeddial number (0 through 9).personal speed dial no.Enter thedesired number.desired no.Dial #. Hang up or pressSP-PHONE/MONITOR .Any TelephoneLift the handset or pressSP-PHONE/MONITOR.#Dial #. Enter the personal speeddial number (0 through 9).personal speed dial no.• You may dial “1 ” instead of “#”.DialingDialing with Personal Speed Dialing (Personal Speed Dialing)Technical Manuals Online! - http://www.tech-man.com
