InstallationInstallation Manual 712.8 Software Installation2.8.1 PC Programming Software InstallationTo program and administer the software of the KX-TD612 by personal computer (PC), youneed to install the TD612 PC programming software to your computer from CD-ROM. It isimpossible to start the PC programming on CD-ROM. You need to install the PC programmingsoftware to your hard disk and start the programme from the drive you installed the software.System Requirements:– Microsoft Windows 95, Windows 98, Windows Me, Windows 2000, or Windows NT 4.0or later– Installation of Internet Explorer 4.0 or later– Minimum requirements(for installing TD612 PC programming software only)CPU: Pentium 133 MHzRAM: 48 MBHDD: 20 MB– Recommendation of the ISDN cards for the remote maintenanceFRITZ!Card PCMCIA/AVMFRITZ!Card PCI/AVMFRITZ!Card classic/AVMELSA MicroLinkTM ISDN USB/ELSAXircom CreditCard TM ISDN Adapter/Intel– Trademarks:– Microsoft, Windows and Windows NT are either registered trademarks ortrademarks of Microsoft Corporation in the United States and/or other countries.– Intel, Xircom, CreditCard, and Pentium are trademarks or registered trademarks ofIntel Corporation or its subsidiaries in the United States and other countries.– AVM and FRITZ! are either registered trademarks or trademarks of AVMComputersysteme Vertriebs GmbH & Co. KG in the United States and/or othercountries.– ELSA and MicroLink are either registered trademarks or trademarks of ELSA AGin the United States and/or other countries.– All other trademarks identified herein are the property of their respective owners.® ® ®®® ®