Panasonic KX-TCD440E Operating Instructions Manual

Panasonic KX-TCD440E Operating Instructions Manual Manual pdf 10 page image

10 Helpline Tel. No. :U.K. 08700 100 076 R.O.I. 01289 8333TelephoneTelephoneMaking calls1 Lift the handset and dial the phonenumber.L To correct a digit, press {C/T}, thenenter the correct number.2 Press {C}.3 When finished talking, press {ih} orplace the handset on the base unit.SpeakerphoneThe handset features a digitalspeakerphone, which allows you to havehands-free conversations. Press {s} to turnon the speakerphone during a conversation.Press {C} to switch back to the receiver.L For best performance, please note thefollowing:− Use the speakerphone in a quietenvironment.− Speak alternately with the caller.− If you or other party have difficultyhearing each other, press {e} or {v}repeatedly to adjust the speaker volumeas necessary.To adjust the receiver or speaker volumePress {e} or {v} while talking.3 levels are available for the receiver.6 levels are available for the speaker.Redial featureTo redial the last number dialledPress {R}, then press {C} or {s}.To redial automaticallyRedial by pressing {s} then {R} if youwant the unit to redial the phone numberagain automatically if the other party’s line isengaged. The unit will redial up to 12 times.While the unit is waiting to redial, {s} willflash and mute is automatically turned on.Note:L Automatic redial is cancelled when thenavigator or any button is pressed.L If mute does not turn off after the line isconnected, press {C/T}.To make a call using the redial listThe last 10 phone numbers dialled arestored in the redial list.1 Press {R}.L The last number dialled will bedisplayed.2 Press {v} repeatedly to select thenumber.L To exit the list, press {ih}.3 Press {C} or {s}.To edit a number in the redial list beforecalling it1 Press {R}.2 Press {v} repeatedly to select thenumber, then press {>}.3 Press {v} repeatedly to display “EDITCALL NO”, then press {>}.L The first digit of the number will flash.4 Press {<} or {>} to move the cursor tothe right of where you want to edit thenumber.5 Edit the number.L To erase a digit, press {C/T}.6 Press {C} or {s}.To erase numbers in the redial list1 Press {R}.2 Press {v} repeatedly to select thenumber, then press {>}.3 Press {v} repeatedly to display“CLEAR”, then press {>}.L If you want to erase all numbers in thelist, select “ALL CLEAR”.