1.4 During a ConversationUser Manual 49Call ParkYou can put a call on hold in a common parking zone of the PBX so that any extension can retrieve theparked call. You can use this feature as a transferring feature.A call can be put into either a specified parking zone (Specified) or any idle parking zone (Auto). If a CallPark button and Call Park (Automatic Park Zone) button have been established, you can select either wayto park by simply pressing the corresponding button.When a call is parked automatically, or more than one call has been parked at the same time, you need tospecify the parking zone number to retrieve the required call.To set• For simple operation, you can automatically hold a call by pressing another CO, G-DN orINTERCOM button, only if preprogrammed (Automatic Call Hold). Consult your dealer.During a conversationPressCall Park.PT/PS(Call Park)Enter a specifiedparkingzone number (2 digits) or pressto park at an idle parking zoneautomatically.During a conversationPressTRANSFER.PT/PSOn-hook.Enter52.parking zone no. SpecifiedAutoIf you hear a busy tone, enter anotherparking zone number or press again.25 C.ToneORDuring a conversationPressRecall/hookswitch.SLTOn-hook.If you hear a busy tone, enter anotherparking zone number.Enter52. Enter a specifiedparkingzone number (2 digits).parking zone no.25 C.Tone
