Panasonic KX-HGW200 Operating Instructions Manual

Panasonic KX-HGW200 Operating Instructions Manual Manual pdf 46 page image

46Restarting the KX-HGW200The KX-HGW200 has two buttons inside the cover. These two buttons areused to initialize or restart the KX-HGW200.To Initialize the KX-HGW200When you do not remember the KX-HGW200 password (p. 27) or whenyou need to clear all the parameters of the KX-HGW200, press and holdthe CLEAR SETTING button for a few seconds. The CLEAR SETTINGbutton allows you to initialize all the parameters of the KX-HGW200 to thefactory presets.To Restart the KX-HGW200When the KX-HGW200 POWER indicator blinks or lights red (p. 11), pressthe RESET button. The RESET button allows you to restart theKX-HGW200 with all the parameters preserved.INTERNETETHERNETHomePNAPOWERKX-HGW200WIRELESSTo close the cover,position the ridge on the rightside of the cover into thegroove on the unit and slidethe cover down.To open the cover,remove the cover bysliding it up whilepressing the arrowmark. CLEAR SETTING buttonRESET button≥Press these buttons with a pencilor a similar object.Note:When you use the KX-HGW200 DHCP server function (p. 33), restartthe computer(s) in the home network.Note:When you use the KX-HGW200 DHCP server function (p. 33), restartthe computer(s) in the home network.