Panasonic KX-HGW200 Operating Instructions Manual

Panasonic KX-HGW200 Operating Instructions Manual Manual pdf 29 page image

Installation29For assistance, please call: 1-800-272-7033Internet Configuration and ConfirmationInternet ConfigurationSome carriers or ISPs (Internet Service Providers) require you to enter theparameters for your Internet connection. These parameters should becollected and noted using the following Quick Prep Sheet or by using thesteps on pages 20–26. In this case, set the parameters to the KX-HGW200first, and then confirm the setup. The parameters can be entered in theBasic Setup web screen of the KX-HGW200. Follow the steps below (1-4)and enter the parameters.1: Access the KX-HGW200 administration web screen following the stepson p. 27 and 28.2: Make the Basic Setup screen appear by clicking the [Basic\Setup] onthe KX-HGW200 administration top page.3: Enter the parameters following the steps on p. 31.4: When you have finished, restart the computers.ConfirmationAfter you have confirmed the connection between the computer and theKX-HGW200, and set up your Internet connection parameters, confirmationof the connection between the Internet and the KX-HGW200 is needed.If you can access a WWW (World Wide Web) site, your home network hasbeen successfully linked to the Internet.1 On the computer, start up your web browser.2 Enter the address of a web site in the address field (URL line) of yourweb browser and press the Enter key on your computer.A WWW site appears.If a web site does not appear:1: Make sure the address of the web site has been correctly entered inthe address field (URL line) of the web browser.2: Make sure that “Confirmation of the Home Network Setup” on p. 27is successfully made.3: Make sure the connection between the KX-HGW200 and thecable/xDSL modem is successfully made.4: Make sure that the computers, the KX-HGW200, cable/xDSLmodem and other devices in the home network have been turnedon in proper order. See “Turning on the Devices” on p. 19 for moredetailed information.5: Confirm the information on your Internet connection provided byyour ISP. If you are required to enter some parameters, see “BasicSetup” on p. 31 and set the parameters to the KX-HGW200.