Panasonic KX-HGW200 Operating Instructions Manual

Panasonic KX-HGW200 Operating Instructions Manual Manual pdf 35 page image

35For assistance, please call: 1-800-272-7033Using theWeb ScreenPort ForwardingThe Port Forwarding table allows you to control the access from the Internet to the homenetwork. The Protocol, Forwarding Port and Forwarding IP Address can be specified in the tablebelow.Note:Setting the table may pose a security risk because the unknownpacket is sent from the outside of the home network. Please set thetable only when you need to.≥Entry≥Protocol≥Forwarding Port≥ForwardingIP AddressSelect “ENABLED” or “DISABLED”. When set to “ENABLED”, theentry works as specified. When set to “DISABLED”, the entry doesnot work but will work when set to “ENABLED” later.Set the protocol(s) with which you use to send/receive a data fromthe Internet by selecting from the protocol selector. The TCP, UDPor TCP&UDP are available.Specify the port(s) to receive data from the Internet.≥When a single port is desired, type the port number.≥When a range of port is desired, enter the range using “-”. Forexample, to specify the ports from 2000 to 3000, enter as“2000-3000”. The starting port number must be lower in valuethan ending port number.Set the local IP address of a computer in the home network. A datafrom the Internet is forwarded to the IP address entered in this datafield. It is recommended to set up the KX-HGW200 for a static IPnetwork.