Panasonic KX-HGW200 Operating Instructions Manual

Panasonic KX-HGW200 Operating Instructions Manual Manual pdf 16 page image

16“ Setup3 Connect the computer to the wall mounted single-line telephone jack.For more detailed information, refer to the HomePNA card manual.4 If you are thinking of attaching a telephone to the KX-HGW200, followthe steps below (a, b and c). If not, skip these steps.a: Connect the end of the telephone line cord to the PHONE jack onthe KX-HGW200.b: Connect the other end of the telephone line cord to the single-linetelephone jack of the telephone.c: Make sure a dial tone is heard from the handset of the telephone.To connect computers using optional wireless cards:An optional Panasonic wireless card, model KX-HGC200, is required for theKX-HGW200 and for each computer in the network.≥Before you insert the wireless card into the KX-HGW200, turn off theKX-HGW200 by removing the AC adaptor.≥Install a Panasonic wireless card in the wireless card slot of theKX-HGW200 and in the appropriate PCMCIA slot of the computer(s). Thedriver software that comes with the optional wireless card must beinstalled in the computer.≥To install the optional Panasonic wireless card KX-HGC200 and the driversoftware in either the KX-HGW200 or a computer, refer to the operatinginstructions that come with the wireless card.The KX-HGW200 is compatible with the optional Panasonic wireless cardKX-HGC200 only. Do not insert any other PCMCIA card into theKX-HGW200.Telephone PHONE jackTelephone linecordPHONE