*2 This item can be selected when the list is registered on the telephone. Contact your administrator forfurther information.Block anonymous callsThis feature allows the unit to reject calls when the unit receives a call without phone number. The defaultsetting is "Off".IMPORTANTR A password may be required for these settings. We recommend setting with your administrator.Contact your administrator for further information.R This feature is not available on shared lines.[In standby mode]1. Tap / . a "Advanced Settings"2. Tap / . a "Call Settings"3. Tap / . a "Block Anonymous"4. Tap / : Select a desired line.5. Select "On" or "Off". a "OK"Incoming call barring (Caller ID service users only)This feature allows the unit to reject calls from specified phone numbers that you do not want to answersuch as junk calls.When a call is received, the unit does not ring while the caller is being identified. If the phone numbermatches an entry in the call barred list, the unit rejects the call.IMPORTANTR A password may be required for these settings. We recommend setting with your administrator.Contact your administrator for further information.Storing unwanted callersYou can store up to 30 phone numbers in the call barred list by using the caller list or by entering thenumbers directly.[In standby mode]1. Tap / . a "Advanced Settings"2. Tap / . a "Call Settings"3. Tap / . a "Block Caller ID"4. Tap / : Select a blank line.5. Enter the phone number (32 digits max.). a "OK"Editing the phone numbers to reject[In standby mode]1. Tap / . a "Advanced Settings"2. Tap / . a "Call Settings"3. Tap / . a "Block Caller ID"4. Tap / : Select a desired phone number.5. Edit the phone number. a "OK"69Customizing the Telephone