Panasonic KX-HDV430 Operating Instructions Manual

Also see for KX-HDV430: Guide Supplement manual Administrator's guide Operating instructions Quick start guide

Contents

Panasonic KX-HDV430 Operating Instructions Manual Manual pdf 61 page image

3. Tap "Auto Mode".4. Tap "Auto Tracking".*1 a "OK"*1 To cancel Automatic Mode, tap "Off". a "OK"Receiving Alarms from Network CamerasWhen an alarm from a Network Camera (movement detection, error, abnormality, etc.) is detected, thisunit can display the video feed from the camera that issued the alarm.NoteR Alarms can be indicated by a sound and/or a pop-up message on the display.R Depending on the Network Camera, this feature may not be available.When an Alarm Notification Appears in a Pop-up MessageTo connect the Network Camera where the alarm occurred1. Tap "OK" on the pop-up message.NoteR Tap "Cancel" to not connect to the Network Camera.R If you received an alarm during a video call, the call is automatically switched to a voice call.Checking an Alarm[In standby mode]1. Tap / . a "Call History"2. Tap .*13. Tap an item to connect to the camera and view its video feed.*1 A list of Network Cameras where an alarm has occurred is displayed.NoteR To delete an item from the list, tap . a Tap the check boxes of the items you want to delete. aTap . a "OK"Configuring an Alarm NotificationAlarm Notification Settings[In standby mode]1. Tap / . a "Basic Settings"2. Tap / . a "Network Camera"3. Tap "Alarm Settings".4. Tap "Notification".5. Tap "Pop Up". a "OK"Alarm Disarm Period SettingsYou can set the period of time in which other alarm notifications are stopped (disarmed) after an alarmoccurs.[In standby mode]1. Tap / . a "Basic Settings"61Network Camera