Easy DialingMaking a call using the redial listThe last phone number dialed is stored in the redial list (32 digits max.).[In standby mode]1. Press / /[REDIAL].2. Go off-hook.NoteR The type of call (voice or video) is the same as the previous outgoing call.R If this procedure is performed during a conversation, the conversation will end, and then redialing isperformed.Hot Key DialingYou can assign a phone number to each number key and then access the desired phone number bysimply pressing and holding the assigned number key.1. Press and hold the dialing key (0–9) assigned as a Hot Key for more than 1 second.2. Do one of the following:R Go off-hook.*1R Tap "Phone Number".– Tap "Voice Call" to make a voice call.– Tap "Video Call" to make a video call.*1 The type of call that is established depends on the "Call Mode" setting.NoteR While the Hot Key’s information is displayed, you can tap or to select another Hot Key number.R If Hot Key dialing is set to "Auto", a Hot Key number can also be dialed by pressing and holding theassigned dialing key for a specified number of seconds. For details, see “Selecting the Type of HotKey Dialing”, Page 66.R For details about assigning Hot Keys, see “Assigning Hot Keys From Phonebook”, Page 65.Using the Hot LineIf your administrator has configured this function, you can make a call to a registered phone numberautomatically. Contact your administrator for further information.[In standby mode]1. Go off-hook.Using the Incoming/Outgoing Call LogUsing the Incoming Call Log[In standby mode]1. Tap / . a "Call History"2. Missed Call Log: Tap .Incoming Call Log: Tap .3. Tap / : Select an incoming call log.32Making Calls