2. Go off-hook.NoteR Depending on the telephone system, thePark soft key might blink to show that the line has a parkedcall. In this case, you can retrieve the call by pressing the blinkingPark soft key. However, to retrievea parked call using the soft key, the Call Park Retrieve feature number must be set beforehand.Contact your administrator for further information.Talking to Two Parties Alternately (Call Splitting)When talking to one party while the other party is on hold, you can swap the calls back and forth(alternately).To alternate between the parties leaving one party on hold temporarily1. Press [HOLD] during a conversation.2. Dial the other party’s extension number. aCall3. After talking to the other party, press [HOLD].4. Talk to the original party.Three-party ConferenceDuring a conversation, you can add an additional party to your call and establish a conference call.NoteR Your phone system may support advanced conference features, such as conference calls with four ormore parties. In this case, the procedures for handling a conference call may be different from thoseexplained in this section. For details, contact your phone system dealer/service provider.Making a Conference Call1. Press [CONF] during a conversation.2. Dial the party you want to add to the conversation. aCall3. [CONF]Ending a Conference CallTo end the conference call, go on-hook.MuteYou can disable the handset to consult privately with others in the room while listening to the other partyon the phone through the handset.To set/cancel1. [MUTE]NoteR When the icon is blinking on the LCD, Mute is on.Call WaitingDuring a conversation, if a second call arrives, you will hear a call waiting tone. You can answer thesecond call by disconnecting or holding the current call.This is an optional telephone company service. You can receive a call waiting tone and the caller’sinformation. For details, contact your phone system dealer/service provider.23During a Conversation