|
15b) If it is your second time to insert the PoE, system can check the saved MAC addressaccording to --- map to make sure current IPC has connectedor not. If system finds the previous information and the channel is idle, system canmap it to the previously used channel. Otherwise system goes to the next step.c) Thirdly, according to the --- map, system can know theprevious mapping channel of current PoE port. System can select current channelif it is free. Otherwise, it goes to the next step:d) Fourthly, system goes to find the first idle channel it can get.Generally speaking, once you insert PoE, system follow the steps listed above to find the channelavailable.4) When you insert PoE, all channels are in use now.System can pop up a dialogue box for you to select a channel to overwrite. The title of the pop-upinterface is the name of the current operation PoE port. In this interface, All PoE channel becomegrey and cannot select.4.2 LoginOpen IE and input NVR address in the address column. For example, if your NVR IP is 192.168.0.250,then please input http://192.168.0.250 in IE address column.System pops up warning information to ask you whether install webrec.cab control or not.Please click yes button.If you can’t download the ActiveX file, please modify your IE security setup.After installation, the interface is shown as below. See Figure 4-1.Please input your Username and Password.Default factory Username is ADMIN and Password is 12345.Note: For security reasons, please modify your password after you first login.Figure 4-1
|
