Troubleshooting130Print Copy Quality Vertical lines printingon the receiveddocumentPrint out a Journal report (e.g. FUNCTION, 6, 1 , SET and 1)and check quality to make sure whether your machine hastrouble.If Journal report quality is OK, your machine has no problem,report to the sending party that they have a problem.If copy isNG, replace the Toner Cartridge.11716Fuzzy print 1. Make sure you are using the correct paper for the bestpossible print quality.2. Try reversing the recording paper to the other side.146Missing dots or lines/inconsistent darknesswithin print1. Make sure you are using the correct paper for the bestpossible print quality.2. Replace the Toner Cartridge.14616Fading print Your Toner Cartridge may be running out of toner. Replacethe Toner Cartridge.16Faint print You may need to choose a different paper for the bestpossible print quality.146Communication No dial tone 1. Check the connection of the telephone line.2. Check the telephone line.142No auto answer1. Check the connection of the telephone line.2. Check the Reception mode setting.3. If the Fax Parameter No. 13 (AUTO JOURNAL PRINT) isset to "Valid" (default setting) and the machine is printingthe received document from memory, which also happensto be the 32th transaction, the machine will not auto answeruntil the Transaction Journal completes printing.14262Cannot transmit orreceiveAn information code will be shown on the display. Refer to theinformation code table to find out the trouble.133No Unit Operation No unit operation To reset the machine, turn-off the Power Switch for a fewseconds then turn it on again.22Mode Symptom Cause / Action page
