Panasonic F-YWP33N Operating Instructions Manual

To force Continuous Dehumidifying(when humidity level cannot be controlled)To clean and restrain bacteria(Refer to: Effectiveness of Filter P.18)(Dehumidifying operation is stopped at this time)Maintain humidity level (approximately 65%)Operation mode / Air volume selection8Air volume selection (Laundry/Mode/Humidity)21 Insert the power plugTurn on the unitPress to select3P.11Select theAir direction4To stop operationWhen Full Tank Indicator isflashing (P.14)Air volume selectionThe product may run 3 minutes in fanmode after operation stopped to dry itsinternal side.(power off mildew prevention p.7)Please unplug the power plug at least 3minutes after stopping the operation.To use timed power off (P.14)Operation will stop → Please empty thetank3 2 14Mode indicatorsAir volume displayPower off/on buttonAir flow scope displayTo keep humidity at a comfortable levelHumidity sensor detects the ambient leveland keeps indoor humidity at the mostsuitable level for human body. However, thefeeling of humidity varies from person toperson; the dehumidifying mode is availablefor adjusting the humidity if needed.The Dehumidifier operates during highambient humidity, and stops at low ambienthumidity.Humidity level will be adjusted automaticallyaccording to the indoor temperature.OperationmodeLouver indicatorYour product may enter protection mode with airvolume and direction in case room temperaturegoes above 32ºC. (system sounds three beeps ifyou try to press air volume and direction key)Press toselectThe best operation air volume infactory default settingsFor economy drying,dehumidification, and fan operationFor quiet drying, dehumidification,and fan operationTo change air volume(select operation mode P8~P10 before selectingsettings)For fast drying, dehumidification,and fan operation