11Air Direction SelectionYWP33NDown Up AutoWaveWideSpotTo swing louverRunning(normal)Please referto pages belowfor air directionselection!P.12Louver VerticalswingHorizontalswingoutletOperation(Press to select)Running(Press to select)The louver direction indicatorlights off and the louver stopsswinging and starts blowingin one direction.Note(stop swinging)Vertical swing Horizontal swingSend air incenter as wellas left hand andright hand sideSend air inwide rangefrom left torightFocus airin onedirectionSelect operation mode P8~P10 before selecting air direction.To fix the louverThe swing can be set to match the width of the place where you would like the air to reach.The swing can be set to match the height of the place where you would like the air to reach.Select Auto to enable louverswing. When it reaches thedesired location, press theagain.Do not move the louver whileswinging operation is inprogress.(The swing range will change.)If you do not select ahorizontal swing setting, thedry air outlet will expel airalong its entire width.