Panasonic ET-RPS100G Operation And Setup Manual

Contents

Panasonic ET-RPS100G Operation And Setup Manual Manual pdf 9 page image

Attaching the POWER SUPPLYENGLISH - 9Attaching the POWER SUPPLYBe sure to ask a qualified technician or your dealer.r To the equipment installer:Before you begin, make sure to read “Read this first!” (x page 3).Precautions for attaching and removing the POWER SUPPLYf Make sure to turn off the power before attaching or removing the unit to/from the Multi Window Processor.f Do not touch the connecting part of the POWER SUPPLY directly.g Doing so may result in static electricity that damages components.f To prevent damage by static electricity, touch a metal object nearby to remove electrostatic charge on your body before you begin.f Be careful to avoid injury when attaching or removing the POWER SUPPLY.f Install the POWER SUPPLY to the Multi Window Processor by slowly and securely inserting it horizontally into the connector.g Incorrect attachment may result in failure to operate or malfunction.Attaching the POWER SUPPLYScrew POWER SUPPLY fixing screwFig. 1 Fig. 2 Fig. 31) Remove the cover for the POWER SUPPLY attachment section. (Fig. 1)f Use a Phillips-head screwdriver to turn the screw with toothed lock washer (x 1) securing the cover for the POWER SUPPLYattachment section counterclockwise, and slowly open and remove the cover in the direction of the arrow.2) Carefully insert the new POWER SUPPLY to the insertion position. (Fig. 2)f Make sure that the switch of the new POWER SUPPLY is on the <h> side before installing.f Insert the POWER SUPPLY fully and securely.3) Use a Phillips-head screwdriver to securely tighten the POWER SUPPLY fixing screw (x 1). (Fig. 3)4) Attach the power cord provided with the POWER SUPPLY to the terminal.Attentionf The removed screw with toothed lock washer and the cover for the POWER SUPPLY attachment section will be required when removingthe POWER SUPPLY that is no longer needed. Store it for installation at a later date.Removing the POWER SUPPLYPOWER SUPPLY fixing screwHandleFig. 11) Press the switch of the POWER SUPPLY towards the <h> side to turn off the power.

/ 12

Related manuals for Panasonic ET-RPS100G